KOBE-30

Suitable for welding thin steel structures, thin steel sheets. In the work of building ships, trains and motor vehicles made of steel

KOBE-30 is a high flux titania type insulated electrode. Which provides intense arc And still, it can be used for welding very well in the position - dragged down The resulting weld surface is smooth and shiny. Ideal for welding thin structures Which focuses on welding in the position - dragged down

1) Do not use a welding current higher than the recommended range. (As attached to the wire box), because not only will it reduce the ability of X-ray inspection. It also causes a lot of welding flakes, causing edge bites. And the cover of the slack is not good enough.
2) to get the best results The electrodes should be heated before use at 70-100 C for 30-60 minutes. Excessive moisture absorption of the electrodes will lower the working properties of the electrodes. And may cause air bubbles to build up in the weld